Hong Kong
Victoria

Discover travel destinations of travelers writing a travel journal on FindPenguins.
Travelers at this place
    • Day 28–29

      Bali - Indonesien

      January 14 in Hong Kong ⋅ ☀️ 21 °C

      14.01.2024
      Bali - Indonesien
      Guten Morgen Bali...
      Hab extra die Vorhänge nicht zugezogen über Nacht, um ja nicht die Einfahrt zu verpassen...
      Und so gleiten Balis Landschaften an mir vorbei während ich im Bettchen liege...
      Wir wollen früh los... lange Zeit den Anblick von meinem gemütlichen Plätzchen zu genießen hab ich nicht..
      Fühle mich recht fit und freue mich auf den Ausflug...
      Also schnell duschen, anziehen... einen Happen essen... und stehen wir auf der Pier...
      Auch hier Begrüßung mit balinesischem Tanz und Musik...
      Außerhalb des Hafens wartet unser Fahrer...standesgemäß in balinesischer Tracht...
      Der freut sich ganz dolle uns zu sehen und ist begierig uns so viel wie möglich zu zeigen in der kurzen Zeit unseres Aufenthaltes.
      Daumen hoch.... das wollen wir auch...
      Es ist seit langem der erste Ausflug der auf Deutsch stattfindet... ist ganz ungewohnt...
      Bin beeindruckt... unser Guide hat sich Deutsch selbst beigebracht und spricht super...

      Wir überlassen ihm die Reihenfolge der Stationen, die wir sehen wollen und landen in einem Silberdorf...
      Auf Bali gibt es viel Kunsthandwerk und diese sind in ortsbezogenen Werkstätten organisiert...
      Die Anlage an sich ist schon ein Kunstwerk und sieht aus wie ein Tempel...
      Wir bekommen erklärt wie der Silberschmuck entsteht... ganz schön komplex und viel Handarbeit..
      Super schöne Stücke... die Verkäuferin ist goldig und hat echt Spaß am Handeln ... ein Bietergewitter ... viel Gelächter und für eine unserer Mädels ein super Preis für ein super Schmuckstück.

      Und weiter geht es... zu den Reisfeldern, die hier hübsch in Terrassen angeordnet sind...

      Auf Bali gibt es viel Verkehr... alles ist quirlig und geschäftig... und sehr nett anzuschauen...
      Ohhh so ein kurzer Shopping Stopp wäre toll... ja... der passt auf dem Rückweg noch ins Programm.... erstmal Natur und Reisfelder...

      Wow ist das ein toller Ausblick....
      Die Reisfelder sind umgeben von Dschungel, die Luft riecht würzig nach Pflanzen und Kräuter...
      Ja Kräuter werden in jedem Garten angepflanzt und für vieles benutzt...
      Die Verehrung von Naturgöttern ist auf Bali noch üblich...das sehen wir auch überall in Form von kleinen geflochtenen Körbchen mit Opfergaben vor Türen und Geschäften.

      Wir möchten mehr darüber erfahren und das geht am besten in eimem Tempel.
      Es gibt hier einen bekannten Wassertempel.... da zieht es uns hin....
      Schön gelegen... umgeben von unglaublicher Natur... schreifen wir durch die Anlage und hören Geschichten von den vielen Göttern an denen wir vorbei kommen....

      Viel Wasser mit vielen Fischen symbolisieren das Leben, welches das Wasser bringt...

      Wieder im Auto auf dem Weg zu unserer nächsten Attraktion... erzählt unser Guide, dass nicht nur Reis und Kokosnüsse in Bali angebaut werden sondern auch Kaffee...
      Und ob wir schon mal von dem Kaffee gehört haben... der von Katzen gefressen,  ausgeschieden und dann zubereitet wird..

      Na klar haben wir davon gehört.....
      Kaffee ist überhaupt eine gute Idee...
      Wollen wir den probieren????
      Und ob.... na dann.... Blinker gesetzt und los....

      Das Café ist wunderschön gelegen... Zugang über ein Reisfeld... in den Wald... vorbei an der Katze... die hier ihren Job macht...
      Es gibt 20 Katzen,  die hier "arbeiten "... naturlich abseits der Besucher auf einem eigenen Gelände... die Katze im Gehege macht Pause... und wird wöchentlich gewechselt.... damit sie nicht so gestresst werden von den Besuchern...
      Es gibt eine Showrösterei... da kann man sich am Kaffee rösten versuchen... verschiedene Kaffeesorten erschnuppern und die Gewürze und Früchte bestaunen aus denen hier Tee und Kaffee Varianten entstehen...
      Ein unwiderstehlicher Duft nach Kaffee liegt in der Luft... wir bekommen noch mehr Kaffeedurst....und sind berauscht von der üppigen Vegetation und dem Ausblick, der sich uns hier so unverhofft bietet....
      Wir bekommen ein ganz entzückendes Plätzchen zugewiesen... unser Katzenkaffee kommt zusammen mit einer Palette an Tässchen, die die hier produzierten Köstlichkeiten enthalten...

      Mhhh der Katzenkaffee schmeckt echt gut...auch die anderen Tee und Kaffee Sorten sind gut....
      Definitiv müssen wir in den Shop .... Souvenirs shoppen...

      Ich kauf auch Kaffee und Tee und, da kann ich ja immer nicht wiederstehen.... Seife.
      Alles nützliche Dinge, finde ich... kann ich in Neuseeland gut verbrauchen und mich dabei an die schönen Tage hier erinnern...

      Weiter gehts .... es stehen noch viele Punkte auf unserem Zettel....
      Nächster Halt.... Batik Markt...
      Hier gibt's jede Menge schöner Schals...Tücher... Kleidung aus tollen Stoffen und einiges andere mehr...
      Ein Paradies für uns Mädels...
      Sehen... kaufen... weiterfahren....

      Unterwegs kommen wir an einem Flusslauf vorbei...
      Habt ihr gesehen??  Hier werden Kokosnüsse und Reis geerntet....

      Nee.....haben wir nicht....
      Vollbremsung... ran an die Seite und aussteigen...
      Schade... die Männer sind schon runter von den Palmen ....
      Aber auf der anderen Seite sehen wir, wie Reis in Handarbeit geerntet wird....
      Puh das sieht anstrengend aus... die Reiskörner werden rausgeschlagen... und dass bei gemütlichen 33 Grad...

      Die Männer von der Kokosnuss Ernte wollen auch ihr Stückchen Aufmerksamkeit und schwups... erklimmen sie wieder die Palmen... und demonstrieren uns die Ernte..
      Die Kokosnüsse klatschen vom Baum in den Fluss.... es ist die wahre Freude... es spritzt... wir bekommen unsere kleine Abkühlung und die Frauen sammeln die Nüsse aus dem Flüsschen...

      Wir knipsen, alles freut sich ... es wird gelacht und gestaunt ... wie schnell so eine große Palme erklommen werden kann.

      Unser Guide möchte uns eine Freude machen und so wechsel zwei Kokosnüsse, die eben noch am Baume hingen den Besitzer .... zwei drei kräftige Hiebe mit einem großen Messer und schon können wir das frische Kokosnusswasser genießen...

      Im nächsten Shop noch Strohhalme besorgt .... ahhh viel besser um an das frische Wasser zu gelangen...

      Auch hier gibt es eine kleine Überraschung...
      Wir haben den Duft von den Räucherstäbchen, der hier überall präsent ist gelobt... und schon hat unser Guide uns welche als Geschenk besorgt...sooo liebt...

      Was steht noch auf dem Programm...
      Galerie und Kunstmarkt.... schaffen wir das noch??? Klar auf jeden Fall...

      Vielleicht können wir ja vorher noch so eine tolle Einkaufsstrasse entlang bummeln.... muhh das könnte knapp werden...
      Ach bitte ... nur ganz kurz....
      Na gut.... ganz kurz...
      Aus ganz kurz wurde etwas länger...
      Es gibt hier aber auch tolle Geschäfte...
      Überhaupt nicht kitschig... alles tolle hochwertige Sachen ...
      Keine üblichen Souvenirs....ach ja.... wenn wir nur mehr Zeit hätten.....
      Okay.... für den Geldbeutel war es wahrscheinlich ganz gut....

      So aber nun sind wir unterwegs zum Bildermarkt... auch hier wird uns die Maltechnik erklärt.... oh was für feine Pinsel es gibt....und wie detailliert hier gezeichnet wird...
      Tolle Bilder mit kräftigen Farben und schönen Landschaften...
      Von klassischen Szenen bis zu abstrakter Kunst gibt's hier alles...

      Mein Interesse bleibt dem Händler nicht verborgen und so ziehe ich meine Kreise durch die Galerie mit ihm im Schlepptau und versuche zu erklären... das ich leider nichts kaufen kann... kann mir leider nicht noch mehr Gepäck aufladen...
      Aber er macht doch so gute Preise... extra speziell für mich...
      Nee nee schnell raus hier....

      Auf dem Kunstmarkt, der letzen Station, ist es schon entspannter... hier gibt es auch alles was das Herz begehrt....
      Viel Zeit bleibt leider nicht... Zurück zum Boot werden wie ca. eine dreiviertel Stunde benötigen...

      Schweren Herzens reißen wir uns los....und machen uns auf den Rückweg...
      Wir sind begeistert von Bali... wieder ein Ziel mehr zu dem ich zurück kommen möchte...
      Die Verabschiedung ist ganz herzlich von unserem Guide... kommt bald wieder und lasst es euch gut gehen....

      Nach der obligatorischen Dusche und einem Imbiss am Grill... genießen wir die Ausfahrt aus dem Hafen von Bali...

      Schön Abendessen und schöne Gespräche...bin glücklich und gehe ins Bettchen....
      Read more

    • Day 25–27

      Seetage am Äquator

      January 11 in Hong Kong ⋅ ☁️ 19 °C

      11.01.2024
      Seetag .... juhu....
      Heute ist nur ausruhen angesagt...
      Ich bleibe lange im Bett und freue mich, dass ich da heute auch bleiben kann.
      Ein leichtes Frühstück und dann eine Testrunde an Deck.
      Man merkt.... wir sind in den Tropen...
      Es ist kurz vor 9.00 Uhr... und 30 Grad sind schon erreicht.... ein Lüftchen weht nicht.
      Perfekt für einen Tag in der kühlen Kabine.

      Wir sind Richtung Indonesien unterwegs und werden morgen den Äquator überfahren.... dafür gibt es schon heute einige Aktionen...
      Tropische Party mit Cocktails...
      Neptun hält Audienz mit seinem Gefolge... und so weiter...

      Mich kann gar nichts locken.... außer mein Bett....
      Beim Abendessen erfahre ich, dass ich nichts verpasst habe und schon ein bisschen besser aussehe...
      Hab auch das Gefühl die Medikamente schlagen an... es geht Berg auf...
      Trotzdem gehe schnurstracks ins Bett und fröhne dem Fernsehen.....

      12.01.2024
      Guten Morgen vom Äquator...
      Wir überqueren den Äquator genau 9.10 Uhr... dieses unglaubliche Ereigniss fällt zusammen mit dem ersten richtige  Frühstück für mich seit langem...
      Ach ist das schön, ich merke meine Lebensgeister kommen zurück...
      Die nutze ich ..... um Wäsche zu machen... wird mal wieder Zeit...

      Als Belohnung mach ich mich auf in die Sauna.... das muss heute mal sein... den Rest von meinem Alien loswerden..
      Da bin ich auch ganz alleine... schön entspannt..
      Es gibt eine Biosauna, Dampfbad, Rasoul, Wirlpool und heiße Liegen.
      Ein toller Ruheraum mit Blick aufs Meer, mit Wasser und Teebar ist auch vorhanden...und alles für mich allein...
      Ach warum hab ich das nicht schon früher gemacht... es ist himmlisch...

      Es gibt heute interessante Veranstaltungen über den Äquator...die mich interessieren...
      Ich erfahre, wie Längen und Breitengrade entstanden sind...
      Das die alten Griechen schon 300 Jahre vor unserer Zeitrechnung wussten, dass die Erde rund ist...
      Der Äquator wandert und dass man aufgrund der geringeren Erdanziehungskraft hier weniger wiegt...es ganze Äquatordörfer gibt, die nicht am Äquator liegen...

      Heute ist auch der Tag an dem ich seit langem mal wieder mein Abendessen aufgegessen habe... geht wohl wirklich Berg auf...

      Und darum drehen wir noch ein paar Verdauungsrunden an Deck....
      Mal schauen was im Nachtclub los ist???
      Okay... machen wir...
      Musik ist ganz gut.. also noch kurz das Tanzbein geschwungen...
      Nun wird es aber Zeit fürs Bettchen.....

      13.01.2024
      So Äquator überquert... nun sind wir unterwegs in der Bali See....
      Bali ist auch das nächste Ziel, welches wir morgen früh erreichen...
      Heute will ich etwas fleißig am Computer sein, Mails machen nochmal Einreisebestimmung für Neuseeland checken... hatte ja mal ein Visum beantragt und da ist noch nichts passiert... und so einiges anderes...
      Ganz wie ich es mi vorstelle funktioniert es nicht...
      Aber ich hab jetzt meine nächste Etappe gebucht...
      Von Neuseeland gehts zurück nach Hongkong und dann nach Khatmandu...
      Hat ganz schön gedauert... ist schon Mittag...
      Erstmal sehen wie es draußen ist und ein paar Ründchen drehen...
      Oh wir haben Wetter.... faszinierend... auf einer Seite leichte Federwolken blauer Himmel blaues Meer... auf der anderen Bootsseite....sehr dunkle Wolken, die sich übereinander türmen... der Wind ist hier stärker und das Meer ist Schlammbraun...
      Da kommt bestimmt noch was....

      Egal... ich stiefel in die Sauna...
      Nach dem ersten Saunagang ist das Gewitter da...
      Ich liege auf der warmen Steinliege und schaue den Blitzen zu wie sie fast senkrecht auf das Meer treffen...
      Ordenlicher Donner....mehr Blitze... und dann plötzlich dicke fette Regentropfen...

      Das nehmen auch andere zum Anlass die Sauna auszuprobieren und ich bin hier heute nicht ganz allein...
      Ist nur ein kurzes Intermezzo... Stunde später gehört die Sauna wieder mir allein...

      Es wird wieder ein schönes entspanntes Abendessen mit den Mädels...
      Wieder eine Abschlussrunde an Deck...
      Wahnsinn wie schnell 3 Seetage vorbei sind...

      Wir freuen uns auf Bali... haben einen Fahrer gemietet und wollen die Insel erkunden... leider wieder nur ein kurzer Aufenthalt... aber wir machen das Beste daraus....
      Read more

    • Day 1

      Start in FaM u. Zwischenstopp Hongkong

      December 9, 2023 in Hong Kong ⋅ ☀️ 22 °C

      Wir sind extra zeitig und hungrig zum Flughhafen, um nach dem Checkin schön zu frühstücken. Aber: Wir mussten sofort zum Gate und dort gab es nur Minilädchen mit geringem Angebot. Also Brezel und 11er, kein pompöses Frühstück.Read more

    • Day 10

      Now that's a Buddha!

      October 6, 2019 in Hong Kong ⋅ ⛅ 24 °C

      Yesterday was an unscheduled break day as the local government had decided to close down the entire MTR system (the subway) because of damage to the stations caused by protestors. My original plan had been to visit Lantau Island and ride the Ngong Ping cable car. So yesterday's plan became today's, because I'm more flexible than a yoga instructor!
      Anwyay, we headed down to the lobby about 8:30am, and even though the MTR was back in action, it was in a limited fashion and frustratingly not the stations I needed. This meant alternative transport needed to be found for the 30k plus journey to Ngong Ping. I had researched the cost of a taxi and decided that $300HK was acceptable to my hereditary frugalness.
      A smooth 25 minute taxi ride dropped us off at the Ngong Pin 360 experience Lantau terminal. We were soon cocooned in the comfort of our gondola and climbing our way across the bays and over the hills towards Ngong Ping. The views are majestic and as we ascended we had a superb view of the planes taking off and landing at adjacent Hong Kong airport, which was a great bonus. In about 15 minutes we arrived at the upper terminal and exited our car to be offered a printed photo of us beginning our trip. They had printed and bound this in a presentation folder and even encased our image in a snowglobe. I don't know what tricky Chinese magic they had used to get this done so quickly, but I was happy to hand over my $280HK, for the photo folder of course, not the snowglobe, I'm not a narcissist.
      The reason this cable car exists is to ferry tourists and pilgrims to the Po Lin monastery and giant buddha at the top of the peak. I'm a bit of both I guess, which allowed me to enjoy the experience on multiple levels, because I have more layers than an onion.
      We hiked the hundreds of steps uphill to the giant buddha, where we were suitably awed and then spent time meandering around the monastery trying to be respectful and not cause any international or religious incidents.
      After about an hour and a half we journeyed back down from the mountain, and spent the next three hours worshiping at the alter of capitalism, which in these parts is known as the Citygate Outlet Mall.
      Finally we caught another taxi back to Kowloon through the now torrential late afternoon rain. As we were driving back to Tsim Sha Tsui we noticed hundreds of black clad and face mask wearing protesters streaming down Sailisbury Road towards the Star Ferry terminal. There will be more trouble in town tonight. I really hope both sides can show some restraint!
      Read more

    • Day 50

      Circuit Board Introduction-FS Technology

      August 15, 2022 in Hong Kong ⋅ ⛅ 30 °C

      Circuit board is a kind of electronic circuit, which is very common in our life. There are such items in computers, mobile phones and refrigerators. Printed circuit board is also called pcb board aluminum substrate, high frequency board, ultra-thin circuit board, ultra-thin circuit board, Printed (copper etching technology) circuit boards, etc., are the supports for electronic components and the provider of circuit connections for electronic components. The most common printed circuit boards use the method of printing etching resists to produce circuit patterns and circuits, so they are called printed circuit boards or printed circuit boards. Because people want smaller products, mobile phones are getting smaller and smaller, computers are getting smaller and smaller, and the circuit boards of FS Technology have become more and more refined. With the advent of the 21st century, production technology has become more and more developed. The vast majority of PCBs now use etch resists (lamination or coating), and after exposure and development, PCBs are made by etching.
      The working principle of FS technology pcb
      PCB is manufactured by many processes, mainly including the following processes, pads, electrical boundaries, mounting holes, vias, components, connectors, wires, filling, etc. If the pcb is distinguished according to the number of layers, it can be divided into the following common types: pcb single-layer board (Single Layer PCB), pcb double-layer board (Double Layer PCB) and pcb multi-layer board (Multi Layer PCB) three types . The main processes of these pcbs have the following functions, each of which is essential:

      https://fspcba.seesaa.net/article/488573435.htm…

      There are metal vias and non-metal vias, where metal vias are used to connect component pins between layers - vias

      for fixing pcb-mounting holes

      Components used for connection between pcbs. -connector

      Used to determine the size of FS Technology's pcb, all components on the pcb must not exceed this boundary - electrical boundary

      https://www.navi-tomo.com/user/gall/detail14780…

      The surface copper foil conductive layer is separated by the insulating material of the board base, so that the current flows in various components along the pre-designed route to complete functions such as work, amplification, attenuation, modulation, demodulation, coding, etc. - the working principle of pcb

      Metal Hole-Pad for Soldering Component Pins

      Electrical network copper film-conductor for connecting component pins

      Copper plating for ground network can effectively reduce impedance-filling

      FS technology pcb production method
      Although there are many methods of processing and making PCBs, the traditional rapid board making methods can be mainly divided into two categories: physical methods and chemical methods:

      https://fspcba.seesaa.net/article/488695472.htm…

      ① Physical method:
      By using many utensils and power tools, the copper that is not needed on the circuit board is manually engraved. This method is not very good, time-consuming and labor-intensive, and has low accuracy. Of course, it is applicable if your circuit board design is relatively simple, but not for complex circuit boards.

      Features: It is labor-intensive and time-consuming, the precision is not easy to control and there is irreversibility, and the operation requirements are very high. With the development of science and technology, fewer and fewer people use this method, and people are more inclined to use the chemical method.

      ② Using chemical methods:
      This method is currently the most used method by FS Technology. People etch away unnecessary copper in a corrosive solution by covering a protective layer on a blank copper clad laminate. Of course, technology has made us more and more advanced. We have developed many ways to achieve the protective layer, the most traditional way of hand painting method, the method of pasting customized self-adhesive, the method of film sensitization, and the method developed in 2010. Thermal transfer printing PCB board method.

      Features: The process is relatively complex, but the precision is controllable. It is the most widely used rapid plate-making method at present, but there are still many problems.

      https://www.dclog.jp/en/8617247/576771401

      ③ Hand painting:
      Manually draw the shape of the circuit on the blank copper clad laminate with a soft pen or a hard pen. After drying, it can be put into the solution for direct corrosion.

      ④ Paste the sticker:
      There are all kinds of stickers in the world that are made into strips and discs. Different stickers are combined on the blank circuit board as needed, and they can be corroded after they are glued.

      ⑤ Film sensitivity:
      printed circuit board

      The PCB circuit board diagram is printed on the film by a laser printer, and the blank CCL is pre-coated with a layer of photosensitive material (coated CCL is sold in the market), and it can be exposed, developed, fixed and cleaned in a darkroom environment. Corrosion in solution.

      https://fspcba.tamaliver.jp/e489738.html

      ⑥ Thermal transfer:
      The circuit is directly printed on the blank circuit board by the FS technology thermal transfer printer, and then put into the corrosive solution to corrode.

      To sum up: the previously used physical plate-making method is labor-intensive, time-consuming and low in precision, while the chemical rapid plate-making method has controllable precision, but the process is complex and not environmentally friendly. Regardless of whether it is a physical method or a chemical method, both of them require high operating skills, so neither can be regarded as a good method that can help engineers achieve "fast" board making.

      https://www.illust-box.jp/blog/1050/
      Read more

    • Day 68

      Repair Air Conditioning Circuit Board -

      September 2, 2022 in Hong Kong ⋅ ⛅ 29 °C

      Summary: As we all know, in winter and summer, air conditioners generally need heating and cooling almost every day, so long-term use will inevitably cause some minor problems. Many failures are caused by damaged air conditioner PCBs. So, what are the maintenance methods for common faults of air conditioner PCB? What are the precautions for air conditioning circuit board maintenance?

      https://www.cos.youth4work.com/FS-Technology/ne…

      1. Circuit:
      (1) If there is a problem with the power supply circuit of the air conditioner PCB, it will be displayed in the form of a blown fuse, which directly indicates that the circuit is short-circuited.
      (2) The resistance value can be detected with the ohm plug of the multimeter to judge the short circuit part of the FS technology. After finding the short-circuit part, please replace and repair it in time.

      2. FS Technology uses temperature detection circuit:
      (1) When the temperature of the thermistor is low, the resistance value is large; on the contrary, the higher the temperature, the smaller the resistance; the resistance value of 25 degrees is about 5-20.

      Air Conditioning PCB Repair-fs Technology
      (2) It can be measured with the ohm plug of the multimeter. If the measured resistance value is small or infinite, it proves that the thermistor is damaged and must be replaced immediately.

      https://fspcba.prtls.jp/entry.html?did=91c93a2e…

      3. Receiver circuit:
      (1) Use the DC acceleration of the multimeter to directly measure the ground voltage of the power supply terminal and the signal terminal of the receiving terminal. The normal electrode value is +5 volts and the signal electrode voltage is +2.5 volts.
      (2) If the value is wrong, it should be that the receiving head is damaged or the capacitor is defective. Remove them one by one and find out how to maintain them.

      4. The crystal oscillator circuit of FS Technology:
      (1) After the air conditioner is turned on, use a multimeter to measure the voltage of the two pins of the quartz crystal oscillator, the value is about +2.2 volts; if it is lower than 1.5 volts, the circuit has a problem of stopping vibration.
      (2) The quartz crystal tube can be removed and judged by the ohm plug of the multimeter. If it shows an open circuit, it means that the quartz crystal tube is good; if it is a short circuit, the crystal is damaged.
      CPU error.

      Multilayer circuit board repair-fs technology

      https://fspcba.livejournal.com/401.html

      The three conditions of power supply voltage +5V, reset voltage and clock pulse signal are necessary conditions for the normal operation of the CPU of the circuit board, otherwise the CPU will not work normally. Therefore, a multimeter can be used to detect the voltage of its working state. If the voltage value is normal and the whole machine does not work, it can be judged that the CPU chip is damaged. If the CPU fails, just replace the CPU.

      https://flipboard.com/@fspcba/pcb-assembly-gouh…
      Read more

    • Day 7

      First Day Hong Kong

      November 25, 2017 in Hong Kong ⋅ ⛅ 18 °C

      After my final presentation I went to the airport to catch my flight. Now, I have just arrived in Hong Kong after a 12 hour flight from London Heathrow. I'll be checking into the apartment that I will be staying in for most of my internship tomorrow.Read more

    • Day 211

      Hong Kong Island

      March 31, 2017 in Hong Kong ⋅ 🌧 20 °C

      Unser Hotel befindet sich auf Hongkong Island, nicht weit entfernt vom Central District mit der bekannten Skyline, im Stadtteil Sheung Wan. Mit dem Bus fahren wir durch den Tunnel dorthin. Hier ist trotz vorrückender Hochhäuser noch einiges von der alten Exotik Hongkongs übrig geblieben. Das Warenangebot in diesem Viertel ist faszinierend: Es gibt Dörrfisch, Vogelnester, Ginseng, Antiquitäten ...
      Ganze Straßenzüge haben sich auf eine "Spezialität" festgelegt und heißen dann Herbal Medicine Street, Ginseng Street, Birds Nest Street oder, wie unsere Straße, Dried Seafood Street. Ein Laden neben dem anderen hat Unmengen von diesem getrockneten Fischzeugs - man riecht es auch 😳!
      Zum Glück gibt es normale Lebensmittelgeschäfte und wir finden gleich den Supi 'Welcome' Supermarkt unseres Vertrauens, wo wir nach vielen Wochen (oder sind es schon Monate?) mal wieder unser Frühstück und Abendbrot einkaufen und "zu Hause" essen!
      Read more

    • Day 1

      Hongkong

      February 5, 2019 in Hong Kong ⋅ ⛅ 21 °C

      1. Tag
      Wir sind am Hongkong International angekommen und waren sofort begeistert. Es hat alles wie am Schnürchen geklappt. Selbst die Unpässlichkeit des internen Flughafenzuges wurde perfekt gelöst. Sobald jemand für eine Sekunde einen hilflosen Eindruck machte, war jemand zur Stelle, der in perfektem Englisch weiterhalf. Der Ticketkauf für die Citytrain, der Shuttle vom Bahnhof zum Hotel, alles perfekt. Wir wohnen auf Hongkong Island im "Ibis Hongkong Central & Sheung Wang". Nach einem leckeren Essen haben wir im Hollywood Road Park noch etwas entspannt.
      Außerdem weiß ich seit heute, dass es ein Disney- Land in Hongkong gibt.
      Morgen mehr.
      Read more

    • Day 55

      Rabul - Papa New Guinea

      March 1, 2019 in Hong Kong ⋅ 🌬 21 °C

      Strange place to dock. Good job we was only there for 4 hours, nothing much there. Sweet ppl on the street very friendly selling handmade things and the usual magnets and sarongs. All very colourful. I won’t be visiting that place in a hurry let’s say. They all seem to be chewing beetlenut which makes their mouths red. Also bit of a high factor.Read more

    You might also know this place by the following names:

    Victoria

    Join us:

    FindPenguins for iOSFindPenguins for Android